Achievements

Effect of Strain on Deformation Microstructure and Subsequent Annealing Behavior of IF Steel Heavily Deformed by ARB Process

Naoya Kamikawa; Yoritoshi Minamino
Oct 2004 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.467-470.341

Toughness of Ultrafine Grained Ferritic Steels Fabricated by ARB and Annealing Process

Yuichiro Koizumi; Yoritoshi Minamino
2004 in Materials Transactions
DOI: 10.2320/MATERTRANS.45.2272

Structure and strength after large strain deformation

Hansen, N; Huang, X; Ueji, R; Nobuhiro Tsuji
2004 in Materials Science and Engineering: A
DOI: 10.1016/J.MSEA.2004.02.078

Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding

Y.S. Sato;  Y. Kurihara;  S.H.C. Park;  H. Kokawa;  N. Tsuji
2004 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2003.09.037

Effect of rolling reduction on ultrafine grained structure and mechanical properties of low-carbon steel thermomechanically processed from martensite starting structure

Yuichiro Koizumi
2004 in Science and Technology of Advanced Materials
DOI: 10.1016/J.STAM.2003.10.017

Corrosion behavior of ultra-fine grained Al and Al-2%Cu alloy produced by accumulative roll-bonding (ARB) process

Nobuhiro Tsuji
2004 in Corrosion and Protection of Light Metal Alloys

Surface nanocrystalline metallic materials fabricated by near surface severe plastic deformation

Yuichiro Koizumi
2004 in Surfaces and Interfaces in Nanostructured Materials and Trends in Liga, Miniaturization, and Nanoscale Materials

Structure of martensite transformed from severely deformed austenite in Fe-28.5at.%Ni

Yuichiro Koizumi
2004 in Ultrafine Grained Materials Iii

Fabrication of bulk nanostructured materials by ARB (accumulative roll bonding) process

Nobuhiro Tsuji
2004 in Ultrafine Grained Materials Iii

Microstructure and mechanical properties of ultrafine grained low carbon steel fabricated by conventional cold-rolling and annealing of martensite (martensite process)

Ueji, R; Nobuhiro Tsuji; Minamino, Y; Koizumi, Y
2004 in Ultrafine Grained Materials Iii

Fabrication of Surface Nanocrystalline Aluminum Alloys

M. Sato; Yuichiro Koizumi
Aug 2003 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.426-432.2753

Mechanical Properties as a Function of Grain Size in Ultrafine Grained Aluminum and Iron Fabricated by ARB and Annealing Process

Nobuhiro Tsuji;  Shinya Okuno;  T. Matsuura;  Yuichiro Koizumi;  Yoritoshi Minamino​​​​​​​
Aug 2003 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.426-432.2667

High damping capacity of ultra-fine grained aluminum produced by accumulative roll bonding

Yuichiro Koizumi;  Masanori Ueyama;  Nobuhiro Tsuji;  Yoritoshi Minamino;  Ken’ichi Ota​​​​​​​
Jun 2003 in Journal of Alloys and Compounds
DOI: 10.1016/S0925-8388(03)00265-2

Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

N. Tsuji;  T. Toyoda;  Y. Minamino;  Y. Koizumi;  T. Yamane;  M. Komatsu;  M. Kiritani​​​​​​​
Jun 2003 in Materials Science and Engineering: A
DOI: 10.1016/S0921-5093(02)00709-8

ARB (Accumulative Roll-Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials

Nobuhiro Tsuji; Y. Saito; S.-H. Lee; Y. Minamino
May 2003 in Advanced Engineering Materials
DOI: 10.1002/ADEM.200310077

Quantitative analysis of structure-strength relation of commercial purity aluminium deformed by accumulative roll bonding and annealed at low temperature

R. Ueji;  X. Huang;  Niels Hansen;  Nobuhiro Tsuji;  Yoritoshi Minamino​​​​​​​
2003 in Functionally Graded Materials Vii
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.426-432.405

Densification and Structural Evolution in Spark Plasma Sintering Process of Mechanically Alloyed Nanocrystalline Fe-23Al-6C Powder

Yuichiro Koizumi;  Takanori Tanaka;  Yoritoshi Minamino;  Nobuhiro Tsuji;  Kiyoshi Mizuuchi;  Yoshihira Ohkanda​​​​​​​
2003 in Materials Transactions
DOI: 10.2320/MATERTRANS.44.1604

Effect of Aluminum and Silicon on Magnetic Properties and Microstructures of Fe-Cr-Ni-C-Al and Fe-Cr-Ni-C-Si Alloys

Shin-ichiro YOKOYAMA; Tsutomu INUI; Yoritoshi MINAMINO; Nobuhiro Tsuji
2003 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.89.7_803

Effect of Strain on Microstructures and Mechanical Properties of ARB Processed and Annealed Ultra-low Carbon IF Steel

Nobuhiro Tsuji; Yoshihiro SAITO
2003 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.89.2_273

Interdiffusion in Co Solid Solutions of Co-Al-Cr-Ni System at 1423 K

Yoritoshi Minamino;  Yuichiro Koizumi;  Nobuhiro Tsuji;  Toru Yamada;  Tomoshi Takahashi​​​​​​​
2003 in Materials Transactions
DOI: 10.2320/MATERTRANS.44.63

Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

Huang, X; Tsuji, N; Niels Hansen; Minamino, Y
2003 in Materials Science and Engineering: A
DOI: 10.1016/S0921-5093(02)00182-X

Fabrication of ultrarine grained metallic materials by accumulative roll-bonding

Nobuhiro Tsuji
2003 in Processing and Fabrication of Advanced Materials Xi

Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing

Nobuhiro Tsuji; Y Ito; Y Saito; Y Minamino
Dec 2002 in Scripta Materialia
DOI: 10.1016/S1359-6462(02)00282-8

Orientation Analysis of Ultra-fine Grained Bulk Materials Produced by Accumulative Roll-bonding (ARB) Process by the Use of EBSP Technique

R. Yoda;  H. Haren;  N. Tsuji;  R. Ueji;  T. Toyoda;  Y. Minamino​​​​​​​
Aug 2002 in Microscopy and Microanalysis
DOI: 10.1017/S1431927602106386

Microtexture of Lamellar Structures in Al Heavily Deformed by Accumulative Roll-Bonding (ARB)

Niels Hansen; Yoritoshi Minamino
Aug 2002 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.408-412.715

Texture Properties of AA8011 Aluminum Alloy Sheet Manufactured by the Accumulative Roll Bonding Process(ARB)

Hyoung Wook Kim;  Suk Bong Kang;  Zhan Ping Xing;  Nobuhiro Tsuji;  Yoritoshi Minamino​​​​​​​
Aug 2002 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.408-412.727

Change in Microstructure during Annealing of Ultrafine Grained Aluminum Produced by ARB

Nobuhiro Tsuji;  Yoshiaki Ito;  H. Nakashima;  Fusahito Yoshida;  Yoritoshi Minamino​​​​​​​
Jul 2002 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.396-402.423

Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process

S.H Lee;  Y Saito;  N Tsuji;  H Utsunomiya;  T Sakai​​​​​​​
Feb 2002 in Scripta Materialia
DOI: 10.1016/S1359-6462(01)01239-8

Co Diffusion in a B2-Type Ordered NiAl Compound

Yoritoshi Minamino; Nobuhiro Tsuji; Toru Yamada
2002 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET1952.66.2_67

A new and simple process to obtain nano-structured bulk low-carbon steel with superior mechanical property

Rintaro Ueji; Y Minamino; Y Saito
2002 in Scripta Materialia
DOI: 10.1016/S1359-6462(01)01243-X

Mechanical properties of nano-structured plain low-carbon steels produced by conventional cold-rolling and annealing of martensite starting microstructure

Ueji, R;  Tsuji, N;  Minamino, Y;  Koizumi, Y;  Saito, Y​​​​​​​
2002 in Ultrafine Grained Materials Ii

Effect of Al concentration on growth of antiphase domains in Ti3Al

Yuichiro Koizumi; Katsumura, H; Minamino, Y; Tsuji, N
2002 in Materials Research Society Symposium - Proceedings
DOI: 10.1557/PROC-705-Y7.10

Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite

Yuichiro Koizumi
2002 in Acta Materialia
DOI: 10.1016/S1359-6454(02)00260-4

Ultrafine Grained Steels

Nobuhiro Tsuji
2002 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.88.7_359

Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process

Rintaro Ueji; Y Minamino
2002 in Scripta Materialia
DOI: 10.1016/S1359-6462(02)00088-X

Mechanical properties of ultrafine grained aluminum and ultra low carbon steel produced by ARB process

Nobuhiro Tsuji
2002 in Ultrafine Grained Materials Ii
DOI: 10.1002/9781118804537.CH45

Fabrication and Refinement of 6061(p)/6063 Aluminum Laminate by Accumulative Roll-Bonding (ARB) Process

Seong Hee Lee;  Yoshihiro Saito;  Tetsuo Sakai;  Hiroshi Utsunomiya;  Nobuhiro Tsuji​​​​​​​
May 2000 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.331-337.1169

Change in Microstructure and Mechanical Properties of Ultra-Fine Grained Aluminum during Annealing

Yoshinori Ito;  Nobuhiro Tsuji;  Yoshihiro Saito;  Hiroshi Utsunomiya;  Tetsuo Sakai​​​​​​​
2000 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET1952.64.6_429

Dynamic Recrystallization in 18% Cr Ferritic Steel

Hiroyuki YAGI; Nobuhiro Tsuji; Yoshihiro SAITO
2000 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.86.5_349

Ultra-fine grained ferrous and aluminum alloys produced by accumulative roll-bonding

Nobuhiro Tsuji
2000 in Ultrafine Grained Materials

Pt diffusion in B2-type ordered NiAl intermetallic compound and its diffusion mechanisms

Minamino, Y.;  Koizumi, Y.;  Tsuji, N.;  Morioka, M.;  Hirao, K.;  Shirai, Y.​​​​​​​
2000 in Science and Technology of Advanced Materials
DOI: 10.1016/S1468-6996(01)00003-1

Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process

Nobuhiro Tsuji; Y Saito; H Utsunomiya; S Tanigawa
Mar 1999 in Scripta Materialia
DOI: 10.1016/S1359-6462(99)00015-9

Low Temperature Superplasticity of Ultra-Fine Grained 5083 Aluminium Alloy Produced by Accumulative Roll-Bonding

Nobuhiro Tsuji; K. Shiotsuki; Hiroshi Utsunomiya; Yasukazu Saito
Feb 1999 in Materials Science Forum
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.304-306.73

Strengthening of Sheath-Rolled Aluminum Based MMC by the ARB Process

Seong-Hee Lee;  Tetsuo Sakai;  Yoshihiro Saito;  Hiroshi Utsunomiya;  Nobuhiro Tsuji​​​​​​​
1999 in Materials Transactions, JIM
DOI: 10.2320/MATERTRANS1989.40.1422

Superplasticity of Ultra-Fine Grained Al–Mg Alloy Produced by Accumulative Roll-Bonding

Nobuhiro Tsuji; Katsuhiko Shiotsuki; Yoshihiro Saito
1999 in Materials Transactions, JIM
DOI: 10.2320/MATERTRANS1989.40.765

Mechanical Properties of Spring Wire Drawn and Tempered at Lower Bainite Region

Michihiko AYADA; Kazuo INOUE; Nobuhiro Tsuji; Yoshihiro SAITO
1999 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.85.8_605

Accumulative Roll-Bonding of 1100 Aluminum

Yoshihiro Saito;  Hiroshi Utsunomiya;  Nobuhiro Tsuji;  Tetsuo Sakai;  Ren-Guo Hong​​​​​​​
1999 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET1952.63.6_790

Development of Aus-drawing Process in Medium Carbon Spring Steel for Coil Springs

Michihiko AYADA;  Kazuo INOUE;  Nobuhiro TSUJI;  Hiroshi UTSUNOMIYA;  Yoshihiro SAITO​​​​​​​
1999 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.85.5_411

Ausformed Bainite in SUP7 Spring Steel

Nobuhiro Tsuji; Michihiko AYADA; Taichi TAKASHIMA; Yoshihiro SAITO
1999 in Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
DOI: 10.2355/TETSUTOHAGANE1955.85.5_419

Formation of Ultra-Fine Grains in 5182 Aluminum Alloy Heavily Rolled at Warm Temperatures

Nobuhiro Tsuji; Takeshi Murakami; Yoshihiro Saito
1999 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET1952.63.2_243

Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process

Saito, Y; Utsunomiya, H; Tsuji, N; Sakai, T
1999 in Acta Materialia
DOI: 10.1016/S1359-6454(98)00365-6

Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process

Saito, Y.; Utsunomiya, H.; Tsuji, N.; Sakai, T.

Production of Al-Cu superplastic sheets by means of the melt direct rolling

Tsuji, N.; Nakamura, T.; Saito, Y.

Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process

Y. Saito;  N. Tsuji;  H. Utsunomiya;  T. Sakai;  R.G. Hong​​​​​​​
Oct 1998 in Scripta Materialia
DOI: 10.1016/S1359-6462(98)00302-9

Effect of Vanadium and Niobium on Restoration Behavior after Hot Deformation in Medium Carbon Spring Steels.

Michihiko Ayada;  Masao Yuga;  Nobuhiro Tsuji;  Yoshihiro Saito;  Akio Yoneguti​​​​​​​
1998 in ISIJ International
DOI: 10.2355/ISIJINTERNATIONAL.38.1022

Deformation Microstructure and Nucleation of Recrystallization in Hot-deformed Single Crystals of 18%Cr Ferritic Steel.

Nobuhiro Tsuji; Toyohisa Shinmiya; Yoshihiro Saito; Mineo Muraki
1998 in ISIJ International
DOI: 10.2355/ISIJINTERNATIONAL.38.380

Occurrence of Dynamic Recrystallization in Ferritic Iron

Nobuhiro Tsuji; Yukihiro Matsubara; Yoshihiro Saito; Tadashi Maki
1998 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET1952.62.10_967

Microstructure and Texture of Commercial Purity Aluminum Strips Produced by Melt Direct Rolling

Nobuhiro Tsuji; Yuichi Nagai; Tetsuo Sakai; Yoshihiro Saito
1998 in Materials Transactions, JIM
DOI: 10.2320/MATERTRANS1989.39.252

Dynamic recrystallization of ferrite in interstitial free steel

Nobuhiro Tsuji; Y. Matsubara; Y. Saito
Aug 1997 in Scripta Materialia
DOI: 10.1016/S1359-6462(97)00123-1

Effect of Boron Addition on the Microstructure of Hot-deformed Ti-added Interstitial Free Steel.

Nobuhiro Tsuji; Yukihiro Matsubara; Tetsuo Sakai; Yoshihiro Saito
1997 in ISIJ International
DOI: 10.2355/ISIJINTERNATIONAL.37.797

Dynamic recrystallization of ferrite in IF steel

Nobuhiro Tsuji
1997 in THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II

Initial orientation dependence of recrystallization in hot-deformed ferritic steel

Nobuhiro Tsuji
1997 in THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II

Microstructure and texture of aluminum and Al-Mg alloy strips produced by melt direct-rolling process

Nobuhiro Tsuji
1997 in THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II

Microstructure and Texture of A1050 Aluminium Strips Produced by Melt Direct-Rolling Method

Yuichi Nagai; Nobuhiro Tsuji; Tetsuo Sakai; Yoshihiro Saito
1996 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET1952.60.8_708

Microstructure and texture of A1050 aluminum strips produced by melt direct-rolling method

Nagai, Yuichi; Tsuji, Nobuhiro; Sakai, Tetsuo; Saito, Yoshihiro

Effect of initial orientation on the cold-rolling behavior of solidified columnar crystals in an Fe-36%Ni austenitic alloy

N. Tsuji;  H. Takebayashi;  T. Takiguchi;  K. Tsuzaki;  T. Maki​​​​​​​
Feb 1995 in Acta Metallurgica et Materialia
DOI: 10.1016/0956-7151(94)00264-I

Recrystallization of solidified columnar crystals in an Fe-36%Ni austenitic alloy

N. Tsuji;  H. Takebayashi;  T. Takiguchi;  K. Tsuzaki;  T. Maki​​​​​​​
Feb 1995 in Acta Metallurgica et Materialia
DOI: 10.1016/0956-7151(94)00263-H

Effects of Rolling Reduction and Annealing Temperature on the Recrystallization Structure of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel.

Nobuhiro Tsuji; Kaneaki Tsuzaki; Tadashi Maki
1994 in ISIJ International
DOI: 10.2355/ISIJINTERNATIONAL.34.1008

Effect of constraint on the rolled microstructure of (001)[100] oriented single crystals in an Fe-19%Cr ferritic alloy

Nobuhiro Tsuji; T. Hyoue; K. Tsuzaki; T. Maki
Aug 1993 in Scripta Metallurgica Et Materialia
DOI: 10.1016/0956-716X(93)90151-H

Effect of Initial Orientation on the Recrystallization Behavior of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel.

Nobuhiro Tsuji; Kaneaki Tsuzaki; Tadashi Maki
1993 in ISIJ International
DOI: 10.2355/ISIJINTERNATIONAL.33.783

Effect of Initial Orientation on the Cold Rolling Behavior of Solidified Columnar Crystals in a 19%Cr Ferritic Stainles Steel.

Nobuhiro Tsuji; Kaneaki Tsuzaki; Tadashi Maki
1992 in ISIJ International
DOI: 10.2355/ISIJINTERNATIONAL.32.1319

RECRYSTALLIZATION OF COLUMNAR CRYSTALS OF FERRITIC STAINLESS-STEEL

Nobuhiro Tsuji
1990 in RECRYSTALLIZATION 90

Research Trend on Ultrafine Grained Light Metals (From a Viewpoint of Physical Metallurgy)

N.Tsuji
Materia Japan, 43 (2004), No.5, pp.405-410. (in Japanese)

ARB (Accumulative Roll-Bonding) and Other New Techniques to Produce Bulk Ultrafine Grained Materials

N.Tsuji, Y.Saito, S.H.Lee and Y.Minamino:
Advanced Engineering Materials, 5 (2003), No.5, pp.338-344. <119>
Awarded the 100 best paper award in Osaka University, July 2004, Osaka Univ.
DOI: 10.1002/adem.200310077

Ultrafine Grained Steels

N.Tsuji
Tetsu-to-Hagane, 88 (2002), No.7, pp.359-369.   (in Japanese) <34>
http://ci.nii.ac.jp/naid/110001457443/en/

Recent Development in Meso/Nano Scale Crystallographic Analysis of Deformation Microstructures

N.Tsuji
Materia Japan, 40 (2001), No.7, pp.623-628.  (Review; in Japanese)

Friction Stir Welding of Ultrafine Grained Materials

Hidetoshi Fujii, Yutaka Takada, Nobuhiro Tsuji and Kiyoshi Nogi:
Proc. of the 5th Int. FSW Symp., 14-16 September, 2004, Metz, France. CD-R, 4B-2. (7 pages)

Friction Stir Welding of Ultrafine Grained Aluminum and Copper

H.Fujii, Y.Takada, N.Tsuji and K.Nogi:
Proc. of IIW (Int. Inst. Welding) Pre-Assembly Meeting on "Friction Stir Welding" in Nagoya 2004 (2004), pp.19-24.

Atomic Structure of Grain Boundaries in ARB Processed Copper

K.Ikeda, K.Yamada, N.Tanaka, F.Yoshida, H.Nakashima and N.Tsuji:
Proc. of the 25th RISO Int. Symp. on Mater. Sci., (2004), pp.357-362.

Redundant Shear Strain and Ultrafine Grained Microstructure in Ultralow Carbon IF Steel Deformed by Accumulative Roll-Bonding

N.Kamikawa, N.Tsuji, T.Sakai and Y.Minamino:
Proc. of the 25th RISO Int. Symp. on Mater. Sci., (2004), pp.369-376.

Microstructure and Texture Distribution in Ferritic and Austenitic Steels Intensely Deformed by ARB Process

B.L.Li, N.Kamikawa, N.Tsuji and Y.Minamino:
Proc. of the 25th RISO Int. Symp. on Mater. Sci., (2004), pp.403-410.

Microstructure of Metals and Alloys Deformed to Ultrahigh Strains

N.Tsuji, X.Huang and H.Nakashima:
Proc. of the 25th RISO Int. Symp. on Mater. Sci., (2004). pp.147-170.

Effect of Redundant Shear Strain on Ultrafine Grained Structure in IF Steel Deformed by Accumulative Roll-Bonding

N.Kamikawa, N.Tsuji, T.Sakai and Y.Minamino:
Proc. of the 8th Ultra-Steel Workshop, "Proposal of New Constructions with Ultra Steel"
NIMS, Tsukuba, (2004). pp.228-229.

Corrosion Behavior of Ultra-Fine Grained Al and Al-2%Cu Alloy Produced by Accumulative Roll-Bonding (ARB) Process

Shinji Fujimoto, Taku Iwata, Nobuhiro Tsuji and Yoritoshi Minamino:
Proc. of Corrosion and Protection of Light Metals Alloys, Ed. by R.G. Kelly, Oct, 2003, Orland, PV2003-23, The Electrochemical Society Proceedings Series, Pennington, NJ, (2004),  pp.141-147.

ARB (Accumulative Roll-Bonding) and Other New Techniques to Produce Bulk Ultrafine Grained Materials

N.Tsuji, Y.Saito, Y.Minamino and S.H.Lee:
"Nanomaterials by Severe Plastic Deformation" (Proc. of NanoSPD2), Edited by M.J.Zehetbauer and R.Z.Valiev, Wiley-VCH, Weinheim, (2004), pp.479-490.

Martensite Transformed from Ultrafine Grained Austenite Fabricated by ARB Process in 29.6wt%Ni Steel

H.Kitahara, N.Tsuji, T.Kimura, Y.Koizumi and Y.Minamino:
Proc. of the 2nd Int. Conf. on Advanced Structural Steels (ICASS), April 14-16, 2004, Shanghai, Vol.1 (2004), pp.227-231.

Surface Nanocrystalline Metallic Materials Fabricated by Near Surface Severe Plastic Deformation

N.Tsuji, M.Sato, Y.Minamino and Y.Koizumi:
"Surfaces and Interfaces in Nanostructured Materials", TMS, (2004), pp.93-101.

Fabrication of Bulk Nanostructured Materials by ARB (Accumulative Roll Bonding) Process

N.Tsuji, N.Kamikawa, H.W.Kim and Y.Minamino:
"Ultrafine Grained Materials III", edited by Y.T.Zhu, T.G.Langdon, R.Z.Valiev, S.L.Semiatin, D.H.Shin and T.C.Lowe, TMS (2004), 219-226.  (invited)

Microstructure and Mechanical Properties of Ultrafine Grained Low Carbon Steel Fabricated by Conventional Cold-Rolling and Annealing of Martensite (Martensite Process)

R.Ueji, N.Tsuji, Y.Minamino and Y.Koizumi :
"Ultrafine Grained Materials III", edited by Y.T.Zhu, T.G.Langdon, R.Z.Valiev, S.L.Semiatin, D.H.Shin and T.C.Lowe, TMS (2004), 143-148.

Structure of Martensite Transformed from Severely Deformed Austenite in Fe-28.5at.%Ni

H.Kitahara, T.Kimura, N.Tsuji, Y.Koizumi and Y.Minamino:
"Ultrafine Grained Materials III", edited by Y.T.Zhu, T.G.Langdon, R.Z.Valiev, S.L.Semiatin, D.H.Shin and T.C.Lowe, TMS (2004), 369-374.

Toughness of Ultrafine Grained Ferritic Steel Fabricated by Severe Plastic Deformation

N.Tsuji, S.Okuno, Y.Koizumi and Y.Minamino:
extended abstract for the 2nd ISUGS,  , (2003), CD-R, in press. (invited)

Effect of Antiphase Domain Boundaries on Prism Slip in Ti3Al Single Crystals

Y.Koizumi, Y.Minamino, N.Tsuji, T.Nakano and Y.Umakoshi:
Mater. Res. Soc. Symp. Proc., Vol.753 (2003), pp.267-272.

Effects of reduction and carbon contents on the mechanical properties of the multiphased UFG steels fabricated by martensite cold-rolling and annealing

Rintaro Ueji, Nobuhiro Tsuji, Yoritoshi Minamino and Yuichiro Koizumi:
The 7th STX-21 Workshop, June 24, 2003, Tsukuba, NIMS (2003), pp.322-323.

Galvannealed Behavior on Ultrafine Grained IF Steel Produced by Accumulative Roll-Bonding and Annealing

M.Arai, T.Toki, S.Hinotani, N.Tsuji and Y.Minamino :
Int. Forum for the Properties and Application of IF Steel (IF Steel 2003), May 12-14, 2003, Arcadia Ichigaya, Tokyo. , edited by H.Takechi, ISIJ, Tokyo (2003), pp.228-231.

Effect of Strain on Microstructure, Texture and Mechanical Properties of ARB Processed and Annealed IF Steel

N.Kamikawa, N.Tsuji, Y.Saito and Y.Minamino :
Int. Forum for the Properties and Application of IF Steel (IF Steel 2003), May 12-14, 2003, Arcadia Ichigaya, Tokyo. , edited by H.Takechi, ISIJ, Tokyo (2003), pp.389-392.

Microstructure, Texture and Mechanical Properties of Ultrafine Grained IF Steel

N.Tsuji, R.Ueji and Y.Minamino :
Int. Forum for the Properties and Application of IF Steel (IF Steel 2003), May 12-14, 2003, Arcadia Ichigaya, Tokyo., edited by H.Takechi, ISIJ, Tokyo (2003), pp.347-356. (invited keynote)

Fabrication of Ultrafine Grained Metallic Materials by Accumulative Roll-Bonding

N.Tsuji, Y.Minamino, Y.Koizumi and Y.Saito :
The 11th Int. Symp. on Processing and Fabrication of Advanced Materials (PFAM XI), Oct. 7-10, 2002, Columbus, Ohio., edited by T.S.Srivatsan and R.A.Varin, ASM, Materials Park, OH (2003), pp.320-334. (invited keynote)

Effect of Al Concentration on Growth of Antiphase Domains in Ti3Al

Y.Koizumi, H.Katsumura, Y.Minamino and N.Tsuji :
Mat. Rec. Soc. Symp. Proc. Vol.705, (2002), Materials Research Society, pp.217-222.

Orientation Analysis of Ultra-fine Grained Bulk Materials Produced by Accumulative Roll-Bonding (ARB) Process by the Use of EBSD Technique

R.Yoda, H.Haren, N.Tsuji, R.Ueji, T.Toyoda and Y.Minamino :
Proc. of Microscopy & Microanalysis 2002, Quebec City, Canada, Aug.4-8, 2002., Microscopy & Microanalysis, Vol.8, Suppl.2 (2002), Cambridge University Press, CD-R version, 676CD.

Mechanism of Nano-Crystal Formation by Large Plastic Deformation

N.Tsuji :
The 1st Int. Conf. on Advanced Structural Steels (ICASS 2002), NRIM, Japan, (2002), pp.41-42. (invited keynote)

Mechanical Properties of Nanostructured Low-Carbon Steels Produced by Conventional Cold-Rolling and Annealing of Martensite Starting Microstructure

R.Ueji, N.Tsuji, Y.Minamino, Y.Koizumi and Y.Saito :
"Ultrafine Grained Materials II", TMS, (2002), pp.399-407.

Mechanical Properties of Ultrtafine Grained Aluminum and Ultra Low Carbon Steel Produced by ARB Process

N.Tsuji, Y.Ito, Y.Koizumi, Y.Minamino and Y.Saito :
"Ultrafine Grained Materials II", TMS, (2002), pp.389-397.

A Novel Process to Obtain Nanostructured Low-Carbon Bulky Steel with High Strength

N.Tsuji, R.Ueji, Y.Saito, Y.Koizumi and Y.Minamino :
Proc. of the 22nd RISO Int. Symp. on Materials Science, RISO National Laboratory, Denmark, (2001), pp.407-415.

Characterization of Ultra-Fine Microstructures in Aluminum Highly Strained by Accumulative Roll-Bonding (ARB)

X.Huang, N.Tsuji, Y.Minamino and N.Hansen :
Proc. of the 22nd RISO Int. Symp. on Materials Science, RISO National Laboratory, Denmark, (2001), pp.255-262.

Ultra Grain Refinement of 36%Ni Steel by Accumulative Roll-Bonding (ARB) Process

K.Inoue, N.Tsuji and Y.Saito :
Proc. of Int. Symp. on Ultrafine Grained Steels (ISUGS-2001), ISIJ, Sep.20-22, 2001, Fukuoka, Japan, pp.126-129.

Thermomechanical Processing Starting from Martensitic Structure -A Novel Way to Obtain Ultrafine Grained High Strength Steels-

R.Ueji, N.Tsuji, Y.Saito and Y.Minamino :
Proc. of Int. Symp. on Ultrafine Grained Steels (ISUGS-2001), ISIJ, Sep.20-22, 2001, Fukuoka, Japan, pp.222-225.

Mechanical Properties of Ultrafine Grained Ferritic Steels Produced by Accumulative Roll-Bonding (ARB) Process

N.Tsuji, Y.Ito, R.Ueji, Y.Minamino, Y.Koizumi and Y.Saito :
Proc. of  Int. Symp. on Ultrafine Grained Steels (ISUGS-2001), ISIJ, Sep.20-22, 2001, Fukuoka, Japan, pp.256-259.

Grain Refinement and Strengthening of 6061 Aluminum Alloy by Accumulative Roll-Bonding Process

S.H.Lee, Y.Saito, T.Sakai, H.Utsunomiya and N.Tsuji :
Proc. of the 2nd Int. Conf. on Light Materials for Transportation Systems (LiMAT 2001), Edited by Nack J.Kim, C.S.Lee and D.Eylon, Center for Advanced Aerospace Materials, Pohang Univ. of Sci. & Tech, (2001), pp.635-640.

Recent Development in Meso/Nano Scale Crystallographic Analysis of Steels

N.Tsuji :
Proc. of the 5th STX-21 Workshop, NRIM (2001), pp.126-130. (invited keynote)

Formation Process of Ultra-Fine Grains during Intense Straining of Low-Carbon Steels

N.Tsuji, R.Ueji, Y.Saito and Y.Minamino :
Proc. of the 5th STX-21 Workshop, NRIM (2001), pp.308-309.

In-situ Recrystallization of Ultra-fine Grains in Highly Strained Metallic Materials

N.Tsuji, R.Ueji, Y.Ito and Y.Saito :
Proc. of the 21st RISO Int. Symp. on Materials Science, RISO National Laboratory, Denmark, (2000), pp.607-616.

Ultra-Fine Grained Ferrous and Aluminum Alloys Produced by Accumulative Roll-Bonding

N.Tsuji, Y.Saito, H.Utsunomiya and T.Sakai :
'Ultra-Fine Grained Materials', edited by R.S.Mishra, S.L.Semiatin, C.Suryanarayana, N.N.Thadhani, and T.C.Lowe , TMS (2000), pp.207-218.

Effect of Boron Addition on Microstructure and Texture of Hot-Rolled Ti-Bearing IF Steel Sheet

T.Sakai, Y.Hirai, N.Tsuji and Y.Saito :
Proc. of 4th Int. Conf. on Recrystallization and Related Phenomena (Rex'99; JIMIS-10), JIM, (1999), pp.399-404.

Nucleation Condition of Dynamic Recrystallization in Ferritic Iron

N.Tsuji, Y.Saito and T.Maki :
Proc. of 4th Int. Conf. on Recrystallization and Related Phenomena (Rex'99; JIMIS-10), JIM, (1999), pp.253-257.

Microstructure and Texture Control by Novel Rolling Processes

Y,Saito, T.Sakai, H.Utsunomiya and N.Tsuji :
Proc. of the 6th Int. Conf. on Technology of Plasticity (ICTP), Springer, vol.2, (1999), pp.1923-1930.

Formation Process of Ultra-Fine Grains in Aluminum Alloys Heavily Deformed by Accumulative Roll-Bonding (ARB)

N.Tsuji, Y.Saito, R.G.Hong, H.Utsunomiya and T.Sakai :
Proc. of 20th RISO International Symposium on Deformation-Induced Microstructures: Analysis and Relation to Property,  RISO National Laboratory, Denmark, (1999), pp.523-528.

Formation of Ultra-Fine Grains in Ferrous and Aluminum Alloys Highly Strained by Accumulative Roll-Bonding (ARB)

N.Tsuji, Y.Saito, H.Utsunomiya and T.Sakai :
Proc. of 4th Int. Conf. on Recrystallization and Related Phenomena (Rex'99; JIMIS-10),  JIM, (1999), pp.309-314.

Microstructure and Texture of Aluminum and Al-Mg Alloy Strips Produced by Melt Direct-Rolling Process

Y.Saito, N.Tsuji, Y.Nagai and T.Sakai :
Proc. of the Int. Conf. on Thermomechanical Processing of Steels and Other Materials (Thermec'97), edited by T.Chandra, TMS, (1998), pp.2381-2387.

Dynamic Recrystallization of Ferrite in IF Steel

Y.Matsubara, N.Tsuji and Y.Saito :
Proc. of the Int. Conf. on Thermomechanical Processing of Steels and Other Materials (Thermec'97), edited by T.Chandra, TMS, (1998), pp.653-659.

Initial Orientation Dependence of Recrystallization in Hot-Deformed Ferritic Steel

N.Tsuji, Y.Saito and T.Shinmiya :
Proc. of the Int. Conf. on Thermomechanical Processing of Steels and Other Materials (Thermec'97), edited by T.Chandra, TMS, (1998), pp.403-409.

Proposal of Novel Ultra-High Straining Process for Bulk Materials  -Development of the Accumulative Roll-Bonding (ARB) Process-

Y.Saito, H.Utsunomiya, N.Tsuji and T.Sakai :
Proc. of the 6th Int. Conf. on Aluminum Alloys (ICAA-6), Jpn. Inst. of Light Metals, (1998), pp.2003-2008.

Production of Ultra-Fine Grained Bulk Aluminum Alloys by Accumulative Roll-Bonding (ARB) Process

Y.Saito, N.Tsuji, H.Utsunomiya, T.Sakai and R.G.Hong :
Proc. of the 6th Int. Conf. on Aluminum Alloys (ICAA-6), Jpn. Inst. of Light Metals, (1998), pp.1967-1972.

Development of Melt Direct Rolling Process

N.Tsuji and Y.Saito :
Proc. of the 7th Int. Symp. on Physical Simulation of Casting, Hot Rolling and Welding (ISPS'97), edited by H.G.Suzuki, T.Sakai and F.Matsuda, NRIM, Tsukuba, Japan, (1997), pp.209-218.

Effect of Initial Orientation on Subgrain Structure of Hot-Compressed Fe-18Cr Single Crystals

N.Tsuji, Y.Saito, T.Kiyosada and T.Fukada :
Proc. of the 3rd Int. Conf. on Recrystallization and Related Topics (ReX'96), edited by T.R.McNelley, Monterey Institute of Advanced Studies, Monterey, California, (1997), pp.461-468.

Microstructure and Mechanical Property of the Al-Si Alloy Strips Direct-rolled from Molten State

N.Tsuji and Y.Saito :
Proc. of the 5th Int. Conf. on the Technology of Plasticity (5th ICTP),  edited by T.Altan, Ohio, (1996), pp.907-910.

Production of Aluminum Thin Sheet by Melt Direct Rolling Method and Its Properties

N.Tsuji, T.Sakai and Y.Saito :
Dynamic Plasticity and Structural Behaviors, edited by S.Tanimura and A.S.Khan, Proc. of the 5th Int. Symp. on Plasticity and Its Current Applications (PLASTICITY '95), Gordon and Breach Publishers, (1995), pp.1043-1046

Recrystallization of Columnar Crystals of Ferritic Stainless Steel

K.Tsuzaki, N.Tsuji and T.Maki :
Proc. of Int. Conf. on Recrystallization in Metallic Materials (Recrystallization '90), TMS, (1990), pp.151-156.

強ひずみ加工を利用したバルクナノ結晶・非平衡材料の創製

辻　伸泰：
日本学術振興会　アモルファス・ナノ材料第147委員会　第83回研究会資料（2003）、pp.7-15.　平成15年12月12日弘済会館

バルクナノメタルの力学特性の解明

辻　伸泰、中谷彰宏：
NEDO平成15年度研究助成事業成果報告会予稿集、pp.76-81.　平成15年12月1〜2日、池袋サンシャインシティ文化会館

ARBによる超微細粒材料の製造

辻　伸泰：
Boundary, Vol.19 (2003), No.8, pp.8-11.

Microstructures and Mechanical Properties of Nanostructured Metallic Materials Fabricated by Accumulative Roll-Bonding (ARB) Process

N.Tsuji
ABSTRACT of International Workshop on Nanostructured Metallic Materials, (2003). Nanotechnology Research Network Center of Japan, Tohoku University Materials Research Center (21st Century COE Program).  Mar.9-12, 2003, Akiu.

ARBによる超微細粒材料の製造

辻　伸泰
日本学術振興会先端材料技術第156委員会第30回研究会資料「塑性加工を利用した高付加価値加工」(2003)、pp.90-114.

超微細粒材料の特性予測

辻　伸泰
「超微細結晶粒材料の創製と新たな可能性　ーその基礎と応用ー」日本鉄鋼協会・金属学会関西支部H14材料セミナーテキスト、(2002), pp.49-61.

超強加工のメタラジー(1)：バルク材の強ひずみ加工による超微細粒組織の形成機構

辻　伸泰
「超微細結晶粒材料の創製と新たな可能性　ーその基礎と応用ー」日本鉄鋼協会・金属学会関西支部H14材料セミナーテキスト、(2002), pp.15-23.

合金の相互拡散と反応拡散

南埜宜俊、辻　伸泰、小泉雄一郎：
日本金属学会セミナー「先端材料における拡散　−基礎と応用−」テキスト、(2002)、2002年6月6-7日

繰り返し重ね接合圧延した純銅の粒成長過程のその場観察（In-Situ Observation of the Grain Growth Process in Cu Produced by Accumulative Roll-Bonding Process）

山田康介、増田誠司、池田賢一、吉田冬樹、中島英治、阿部　弘、辻　伸泰：
Annual Reports HVEM Lab., Kyushu Univ., No.26 (2002), pp.71-72.

高圧力熱処理　-高圧力下・衝撃下（中高温）での金属材料の変化-

南埜宜俊、小泉雄一郎、辻　伸泰：
日本熱処理技術協会　平成13年度第４回熱処理技術セミナー「ー熱処理応用講座（その２）ー　真空および特殊雰囲気を活用した熱処理技術」、2002年2月、pp.7-1〜7-8

インレンズSEM法を用いたスーパーメタル解析　Characteriazation of Super Metals by Using In-Lens Scanning Electron Microscopy

佐藤　馨、新倉正和、藤岡政昭、槙井浩一、辻　伸泰：
第４回スーパーメタルシンポジウム論文集、RIMCOF&JRCM, (2001), pp.123-131.

動的再結晶と静的再結晶ーその類似点と相似点「集合組織形成の謎に迫る」

辻　伸泰：
金属学会セミナーテキスト、(2001), pp.33-44.

低炭素鋼の強ひずみ加工（ARB）における超微細結晶粒組織の形成機構

辻　伸泰、齋藤好弘、南埜宜俊：
第３回スーパーメタルシンポジウム論文集、RIMCOF&JRCM, (2001), pp.91-96.

ARB・焼鈍法により製造された微細結晶粒アルミニウムの組織と機械的性質

齋藤好弘、辻　伸泰：
第３回スーパーメタルシンポジウム論文集、RIMCOF&JRCM, (2001), pp.149-161.

強ひずみ加工プロセスにより製造された超微細結晶粒構造用金属材料の局所方位解析

辻　伸泰：
「材料組織制御におけるEBSP技術の活用とその潜在能力」日本金属学会分科会シンポジウム予稿、日本金属学会、(2000), pp.21-24.

繰り返し重ね接合圧延（ARB）法によるアルミニウム合金の結晶粒微細化

齋藤好弘、宇都宮裕、辻　伸泰、左海哲夫、李　星煕：
第２回スーパーメタルシンポジウム論文集、RIMCOF&JRCM, (1999), pp.261-270.

Ti添加IF鋼冷延板の組織と機械的性質に与えるＢ添加の影響

左海哲夫、平井康正、田井一太郎、 辻　伸泰、齋藤好弘
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、4-7-5、pp.264-265.

Ti添加IF鋼熱延板の組織に与えるＢ添加の影響

左海哲夫、平井康正、足立卓也、 辻　伸泰、齋藤好弘
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、4-7-4、pp.262-263.

Ti添加IF鋼熱間加工材の組織に与えるＢ添加の影響

辻　伸泰、松原行宏、左海哲夫、齋藤好弘
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、4-7-3、pp.260-261.

フェライト鋼の動的再結晶

辻　伸泰、松原行宏、齋藤好弘、牧　正志
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、2-9-2、pp.150-151.

フェライト熱間加工材の再結晶とMicrotexture（解説）

松岡才二、村木峰男、辻　伸泰
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、2-6、pp.122-130.

熱間圧縮された18Crフェライト鋼単結晶における再結晶核生成

辻　伸泰、新宮豊久、齋藤好弘、牧　正志
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、1-8-1、pp.72-73.

鋼の熱間加工材における不均一変形組織の形成と再結晶（解説）

辻　伸泰、齋藤好弘
「再結晶・集合組織とその組織制御への応用　ー再結晶研究の最前線ー」 日本鉄鋼協会材料の組織と特性部会再結晶と集合組織研究会最終報告書 、日本鉄鋼協会、(1999)、1-7、pp.64-70.

繰り返し重ね接合圧延（ARB）法によるアルミニウム合金の結晶粒微細化

齋藤好弘、辻　伸泰、宇都宮裕、左海哲夫、洪　仁国：
第１回スーパーメタルシンポジウム論文集、RIMCOF&JRCM, (1998), pp.87-95

溶湯直接圧延法の開発

辻　伸泰、齋藤好弘：
「高温材料と高温加工の現状と今後」日本金属学会分科会シンポジウムテキスト、(1997)、pp.25-28.

フェライト系 Fe-Cr 合金柱状晶材の圧延組織と再結晶

辻　伸泰、津崎兼彰、牧　正志：
「変形特性の予測と制御」日本鉄鋼協会特基研究会変形特性の予測と制御部会最終報告書、日本鉄鋼協会、(1994), pp.114-119.

第１回日本金属学会村上奨励賞、2004.9.28.　社団法人日本金属学会

辻　伸泰

大阪大学論文100選・2003-2004・選出、2004年７月、大阪大学

N.Tsuji, Y.Saito, S.H.Lee and Y.Minamino
"ARB (Accumulative Roll-Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials", Advanced Engineering Materials, Vol.5 (2003), pp.338-344.

大阪大学論文100選・2002-2003・選出、2003年７月、大阪大学

R.Ueji, N.Tsuji, Y.Minamino and Y.Koizumi,
"Ultragrain Refinement of Plain Low Carbon Steel by Cold-Rolling and Annealing of Martensite", Acta Mater., 50 (2002), 4177-4189.

Excellent Reviewer Award

Nobuhiro Tsuji
Acta Materialia & Scripta Materialia, (2003).

高温学会論文賞、社団法人高温学会、2003年

南埜宜俊、小泉雄一郎、辻　伸泰、横山紳一郎
「B2型規則構造のNiAl中のTiの拡散」：高温学会誌、28 (2002), 323-328.

The 18th JILM Young Scientist Award

N.Tsuji
"Ultrafine Grained Aluminum Alloys"
November 18, 2000, Japan Institute of Light Metals.

Sawamura Award (Best Paper Award in ISIJ International)

N.Tsuji, T.Shinmiya, Y.Saito and M.Muraki
"Deformation Microstructure and Nucleation of Recrystallization in Hot-Deformed Single Crystals of 18%Cr Ferritic Steel", ISIJ Int., 38 (1998), pp.380-389
March 29, 1999. Iron and Steel Institute of Japan.

The 7th JIM Young Scientists Award, Microstructure Division

N.Tsuji
September 24, 1997. Japan Institute of Metals.

The 17th Honda Kotaro Young Scientist Award

N.Tsuji
"Microstructure and Texture Control of Strip Cast Steels"
May 15, 1996, Honda Kotaro Foundation.