研究成果・論文

Variant selection of martensite transformation from ultrafine-grained austenite in Fe–Ni–C alloy

Nobuhiro Tsuji
Nov 2013 in Journal of Alloys and Compounds
DOI: 10.1016/J.JALLCOM.2012.04.057

Grain Refinement in Pure Mg and Mg-Zn Alloys during Hot Compression Test

Y. Fukuta;  D. Terada;  T. Sasaki;  K. Hono;  N. Tsuji

Effect of Prior Austenite Grain Size on Hydrogen Embrittlement Behaviors in 8Ni-0.1C Steel

Akinobu Shibata;  Takahiro Matsuoka;  Nobuhiro Tsuji

Microstructural Features and Age Hardening in an Al-Mg-Ga Sacrificial Anode Alloy

Myeong-heom Park;  Daisuke Terada;  Manuel Marya;  Nobuhiro Tsuji

Martensitic Transformation from Nanocrystalline Austenite in Fe-Ni Alloys Fabricated by Electrodeposition

Fumitaka Ichikawa;  Akinobu Shibata;  Hiroki Adachi;  Tohru Yamasaki;  Nobuhiro Tsuji

Texture evolution in {112} <111> aluminum single crystals processed by severe plastic deformation

Keizo Kashihara; Yoshitaka Tsujimoto; Daisuke Terada; Nobuhiro Tsuji
Jan 2013 in Materials Characterization
DOI: 10.1016/J.MATCHAR.2012.10.008

Effect of austenite grain size on kinetics of dynamic ferrite transformation in low carbon steel

Park, N.; Khamsuk, S.; Akinobu Shibata; Tsuji, N.
2013 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2012.12.021

Recrystallization texture of heavily cold rolled polycrystalline nickel sheets with and without strong starting cube texture

Bhattacharjee, Pinaki Prasad;  Takatsuji, Yoshihiro;  Miyajima, Yoji;  Terada, Daisuke;  Tsuji, Nobuhiro
2013 in Functionally Graded Materials Vii
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.753.293

Dynamic Softening of Flow Stress during Dynamic Ferrite Transformation

Park, Nokeun; Khamsuk, Sunisa; Akinobu Shibata; Tsuji, Nobuhiro
2013 in Functionally Graded Materials Vii
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.753.510

Aging behavior of ultrafine grained commercial A1-Mg-Si alloy severely deformed by ARB process

Terada, D.;  Kaneda, Y.;  Horita, Z.;  Matsuda, K.;  Hamaoka, T.;  Hirosawa, S.;  Tsuji, N.

Characteristics of deformation induced martensite in SUS304 austenitic stainless steel deformed at RT and -60°C

Chen, M.;  Gao, S.;  Terada, D.;  Shibata, A.;  Tsuji, N.

Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni-0.1C steel

Park, Nokeun; Akinobu Shibata; Terada, Daisuke; Tsuji, Nobuhiro
2013 in Acta Materialia
DOI: 10.1016/J.ACTAMAT.2012.09.043

Occurrence of dynamic ferrite transformation in low-carbon steel above Ae(3)

Park, Nokeun; Khamsuk, Sunisa; Akinobu Shibata; Tsuji, Nobuhiro
2013 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2012.12.010

Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel

Rajib Saha; Nobuhiro Tsuji
2013 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2013.01.038

Nanocrystalline Twinning Induced Plasticity steel with superior mechanical properties fabricated by cold rolling and annealing

Rajib Saha; Nobuhiro Tsuji
2013 in Functionally Graded Materials Vii
DOI: 10.4028/WWW.SCIENTIFIC.NET/MSF.753.518

Microstructure and mechanical properties of spot friction stir welded ultrafine grained 1050 Al and conventional grained 6061-T6 Al alloys

Y.F. Sun; Fujii, H.; Tsuji, N.
2013 in Materials Science and Engineering: A
DOI: 10.1016/J.MSEA.2013.07.030

Cross-Sectional Distributions of Mechanical Properties of Fine Cu–Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending

Junichiro Tokutomi; Kenichi Hanazaki; Nobuhiro Tsuji; Jun Yanagimoto
2013 in Materials Transactions
DOI: 10.2320/MATERTRANS.MH201323

Microstructures of Pearlite and Martensite Transformed from Ultrafine-Grained Austenite Fabricated through Cyclic Heat Treatment in Medium Carbon Steels

Nobuhiro Tsuji
2013 in Materials Transactions
DOI: 10.2320/MATERTRANS.MH201312

Identical Area Observations of Deformation-Induced Martensitic Transformation in SUS304 Austenitic Stainless Steel

Meichuan Chen; Daisuke Terada; Nobuhiro Tsuji
2013 in Materials Transactions
DOI: 10.2320/MATERTRANS.MBW201212

Improvement in Mechanical Properties of a Cu–2.0 mass%Ni–0.5 mass%Si–0.1 mass%Zr Alloy by Combining Both Accumulative Roll-Bonding and Cryo-Rolling with Aging

Yusaku Takagawa;  Yukinaru Tsujiuchi;  Chihiro Watanabe;  Ryoichi Monzen;  Nobuhiro Tsuji​​​​​​​
2013 in Materials Transactions
DOI: 10.2320/MATERTRANS.M2012207

Enhancement in Strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr Alloy by Cryo-Rolling and Aging

Y. Tsujiuchi;  K. Kita;  C. Watanabe;  R. Monzen;  N. Tsuji​​​​​​​
2013 in Journal of the Japan Institute of Metals
DOI: 10.2320/JINSTMET.77.55

PREFACE

Masaki Tanaka; Naoya Kamikawa; Nobuhiro Tsuji
2013 in Materials Transactions
DOI: 10.2320/MATERTRANS.MPR2013906

MARTENSITIC TRANSFORMATION FROM NANOCRYSTALLINE  AUSTENITE IN FE-NI ALLOYS FABRICATED BY ELECTRODEPOSITION

Fumitaka Ichikawa, Akinobu Shibata, Hiroki Adachi, Tohru Yamasaki, Nobuhiro Tsuji
Proc. of  the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM 8), edited by Fernand Marquis, TMS, Wiley (2013), CD-R, pp.3315-3322.

Aging Behavior of Ultrafine Grained Commercial Al-Mg-Si Alloy Severely Deformed by ARB Process

Daisuke Terada, Yoma Kaneda, Zenji Horita, Kenji Matsuda, Takumi Hamaoka, Shoichi Hirosawa and Nobuhiro Tsuji
Proc. of  the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM 8), edited by Fernand Marquis, TMS, Wiley (2013), CD-R, pp.3259-3264.

MICROSTRUCTURAL FEATURES AND AGE HARDENING IN AN Al-Mg-Ga SACRIFICIAL ANODE ALLOY

Myeong-heom Park, Daisuke Terada, Manuel Marya, Nobuhiro Tsuji
Proc. of  the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM 8), edited by Fernand Marquis, TMS, Wiley (2013), CD-R, pp.1307-1312.

Grain Refinement in Pure Mg and Mg-Zn Al during Hot Compression Test

Y.Fukuta, D.Terada, T.Sasaki, K.Hono, N.Tsuji
Proc. of  the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM 8), edited by Fernand Marquis, TMS, Wiley (2013), CD-R, pp.1249-1256.

EFFECT OF PRIOR AUSTENITE GRAIN SIZE ON HYDROGEN EMBRITTLEMENT BEHAVIORS IN 8Ni -0.1C STEEL

Akinobu Shibata, Takahiro Matsuoka, Nobuhiro Tsuji
Proc. of  the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM 8), edited by Fernand Marquis, TMS, Wiley (2013), CD-R, pp.583-589.

CHARACTERISTICS OF DEFORMATION INDUCED MARTENSITE IN SUS304 AUSTENITIC STAINLESS STEEL DEFORMED AT RT AND -60°C

Meichuan Chen, Si Gao, Daisuke Terada, Akinobu Shibata and Nobuhiro Tsuji
Proc. of  the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM 8), edited by Fernand Marquis, TMS, Wiley (2013), CD-R, pp.563-569.

Relationship between Low-Temperature Embrittlement and Microstructure of Martensite in Low-Carbon Martensitic Steel

Mizuki Tsuboi, Akinobu Shibata and Nobuhiro Tsuji
Proc. of the Int. Symp. on New Developments in Advanced High-Strength Sheet Steels (AHSS), AIST, Warrendale, PA, U.S. ISBN: 978-1-935117-34-6, (2013), pp.377-382.

Correlation between Deformation-Induced Martensitic Transformation and Mechanical Properties in TRIP Phenomenon

Mechuan Chen, Si Gao, Akinobu Shibata, Daisuke Terada and Nobuhiro Tsuji
Proc. of the Int. Symp. on New Developments in Advanced High-Strength Sheet Steels (AHSS), AIST, Warrendale, PA, U.S. ISBN: 978-1-935117-34-6, (2013), pp.371-376.

Effect of Strain Rate on Hydrogen Embrittlement in Low-Carbon Martensitic Steel

Yuji Momotani, Akinobu Shibata and Nobuhiro Tsuji
Proc. of the Int. Symp. on New Developments in Advanced High-Strength Sheet Steels (AHSS), AIST, Warrendale, PA, U.S. ISBN: 978-1-935117-34-6, (2013), pp.303-309.

Crystallographic Features of Hydrogen-Related Fracture in Martensitic Carbon Steels

Akinobu Shibata, Tamotsu Murata, Hiroshi Takahashi and Nobuhiro Tsuji
Proc. of the Int. Symp. on New Developments in Advanced High-Strength Sheet Steels (AHSS), AIST, Warrendale, PA, U.S. ISBN: 978-1-935117-34-6, (2013), pp.293-302.

Local Deformation Analysis in Low-Carbon Dual-Phase Steel Composed of Ferrite and Martensite

Daisuke Terada, Masayoshi Wadamori and Nobuhiro Tsuji
Proc. of the Int. Symp. on New Developments in Advanced High-Strength Sheet Steels (AHSS), AIST, Warrendale, PA, U.S. ISBN: 978-1-935117-34-6, (2013), pp.29-35.

MICROSTRUCTURAL CHARACTERISTICS OF DYNAMIC FERRITE TRANSFORMATION

Nokeun Park, Lijia Zhao, Akinobu Shibata and Nobuhiro Tsuji
Proc. of BAC 2013 (2013)

「バルクナノメタルの研究」

辻　伸泰
科研費News、2013, No.5

Nanocrystalline twip steel with superior mechanical properties fabricated by cold rolling and annealing

○Rajib Saha, Rintaro Ueji and Nobuhiro Tsuji
Rex & GG 2013
Sidney, Australia
2013.5.

Recrystallization texture of heavily cold rolled polycrystalline nickel sheets with and without strong starting cube texture

○P.P.Bhattacharjee, Y.Miyajima, D.Terada and N.Tsuji
Rex & GG 2013
Sidney, Australia
2013.5.

Dynamic Softening of Flow Stress during Dynamic Ferrite Transformation

○Nokeun Park, Sunisa Khamsuk, Akinobu Shibata, Nobuhiro Tsuji
Rex & GG 2013
Sidney, Australia
2013.5.

Dynamic grain growth at room temperature in bulk nanostructured aluminum 

○Nobuhiro Tsuji, Daisuke Terada, Motoki Hishida and Atsushi Ito
Rex & GG 2013
Sidney, Australia
2013.5.

Change in Electrical Resistivity of Pure Ti by ARB

○Masato Ueda, Kei Ota, Masahiko Ikeda, Daisuke Terada, Nobuhiro Tsuji
TMS 2013 Annual Meeting, ‘Titanium’
San Antonio, U.S.
2013.3.