研究成果・論文

Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes

Y. Z. Tian;  Lijia Zhao;  S. Chen;  A. Shibata;  Z. F. Zhang;  N. Tsuji
Nov 2015 in Scientific Reports
DOI: 10.1038/SREP16707

Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization

M H Park; Nobuhiro Tsuji
Aug 2015 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/89/1/012041

Microstructural evolution of Ti-added interstitial free steel in high strain deformation by hot torsion

R Gholizadeh; Nobuhiro Tsuji
Aug 2015 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/89/1/012025

Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium

Yoji Miyajima;  Shin-ya Komatsu;  Masatoshi Mitsuhara;  Satoshi Hata;  Hideharu Nakashima;  Nobuhiro Tsuji​​​​​​​
Mar 2015 in Philosophical Magazine
DOI: 10.1080/14786435.2015.1021400

Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-Situ X-ray Diffraction Technique

Hiroki Adachi; Nobuhiro Tsuji
2015 in Materials Transactions
DOI: 10.2320/MATERTRANS.L-M2015803

Microstructure and Mechanical Properties of Co21Cr22Cu22Fe21Ni14 Processed by High Pressure Torsion and Annealing

Park, Nokeun; Li, Xiang; Tsuji, Nobuhiro
2015 in JOM
DOI: 10.1007/S11837-015-1586-2

Local Stress Evaluation During Deformation in SUS304 Austenitic Stainless Steel

M. Chen;  A. Matsumoto;  A. Shibata;  D. Terada;  T. Miyazawa;  M. Sato;  H. Adachi;  N. Tsuji​​​​​​​
2015 in Materials Today: Proceedings
DOI: 10.1016/J.MATPR.2015.07.436

Ultrafine ferrite formation through cold-rolling and annealing of low-carbon dual-phase steel

Y. Okitsu; Nobuhiro Tsuji
2015 in Materials Science and Technology
DOI: 10.1179/1743284714Y.0000000660

Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy

Nokeun Park;  Ikuto Watanabe;  Daisuke Terada;  Yoshihiko Yokoyama;  Peter K. Liaw;  Nobuhiro Tsuji​​​​​​​
2015 in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
DOI: 10.1007/S11661-014-2594-5

Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy (vol 46, pg 1481, 2015)

Nokeun Park;  Ikuto Watanabe;  Daisuke Terada;  Yoshihiko Yokoyama;  Peter K. Liaw;  Nobuhiro Tsuji​​​​​​​
2015 in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
DOI: 10.1007/S11661-015-2915-3

Improvement of Uniform Elongation by Low Temperature Annealing in Al-2.5%Mg Alloy Processed by Accumulative Roll Bonding

Keizo Kashihara; Yoshikazu Komi; Daisuke Terada; Nobuhiro Tsuji
2015 in Materials Transactions
DOI: 10.2320/MATERTRANS.L-M2015806

Characterization of Hydrogen-Related Fracture Behavior in As-Quenched Low-Carbon Martensitic Steel and Tempered Medium-Carbon Martensitic Steel

Akinobu Shibata;  Tamotsu Murata;  Hiroshi Takahashi;  Takahiro Matsuoka;  Nobuhiro Tsuji​​​​​​​
2015 in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
DOI: 10.1007/S11661-015-3176-X

Influence of Tempering on Mechanical Properties of Ferrite and Martensite Dual Phase Steel

H. Li;  S. Gao;  Y. Tian;  D. Terada;  A. Shibata;  N. Tsuji​​​​​​​
2015 in Materials Today: Proceedings
DOI: 10.1016/J.MATPR.2015.07.372

Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel

Y. Momotani; A. Shibata; D. Terada; Nobuhiro Tsuji
2015 in Materials Today: Proceedings
DOI: 10.1016/J.MATPR.2015.07.387

Relationship Between Local Stress Field in Austenite and Variant Selection in Deformation-induced Martensitic Transformation in Fe-24Ni-0.3C Alloy

A. Matsumoto;  M. Chen;  A. Shibata;  T. Miyazawa;  M. Sato;  N. Tsuji​​​​​​​
2015 in Materials Today: Proceedings
DOI: 10.1016/J.MATPR.2015.07.438

Crystallographic Characterization of Cleavage Plane in Low-carbon Martensitic Steel

M. Tsuboi; A. Shibata; D. Terada; Nobuhiro Tsuji
2015 in Materials Today: Proceedings
DOI: 10.1016/J.MATPR.2015.07.369

Special Member of the Korea Institute of Copper and Copper Alloys  2015.5.21