2017年
-
Hydrogen embrittlement behaviors of ultrafine-grained 22Mn–0.6C austenitic twinning induced plasticity steel
Yu Bai; Yanzhong Tian; Si Gao; Akinobu Shibata; Nobuhiro Tsuji
Sep 2017 in Journal of Materials Research
DOI: 10.1557/JMR.2017.351 -
Deformation Induced Martensitic Transformation and Its Initial Microstructure Dependence in a High Alloyed Duplex Stainless Steel
Lin Xie; Tian-Lin Huang; Yu-Hui Wang; Gui-Lin Wu; Nobuhiro Tsuji
Aug 2017 in Steel Research International
DOI: 10.1002/SRIN.201700169
-
Investigation of the grain size effect on mechanical properties of Ti-6Al-4V alloy with equiaxed and bimodal microstructures
Yan Chong; Tilak Bhattacharjee; Akinobu Shibata; Nobuhiro Tsuji
Jul 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/219/1/012013
-
Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds
Si Gao; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji
Jul 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/219/1/012020 -
Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy
Ruixiao Zheng; Tilak Bhattacharjee; Si Gao; Wu Gong; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Nobuhiro Tsuji
Jul 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/219/1/012055 -
Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite
Daisuke Terada; Gosuke Ikeda; Myeong-heom Park; Akinobu Shibata; Nobuhiro Tsuji
Jul 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/219/1/012008 -
Structural refinement and property optimization in an Fe-23Cr-8.5Ni duplex stainless steel
L. Xie; T.L. Huang; Y.H. Wang; L. Zhang; G.L. Wu; N. Tsuji
Jul 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/219/1/012045 -
Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing
Shuhei Yoshida; Tilak Bhattacharjee; Yu Bai; Nobuhiro Tsuji
Jun 2017 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2017.02.042
-
Post-uniform elongation and tensile fracture mechanisms of Fe-18Mn-0.6C-xAl twinning-induced plasticity steels
Ha-Young Yu; Sang-Min Lee; Jae-Hoon Nam; Damien Fabrègue; Myeong-heom Park; Nobuhiro Tsuji; Young-Kook Lee
Jun 2017 in Acta Materialia
DOI: 10.1016/J.ACTAMAT.2017.04.011
-
Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing
Guanyu Deng; Tilak Bhattacharjee; Yan Chong; Ruixiao Zheng; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji
May 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/194/1/012020 -
Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy
Ruixiao Zheng; Tilak Bhattacharjee; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Nobuhiro Tsuji
May 2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/194/1/012016 -
Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures
Ruixiao Zheng; Tilak Bhattacharjee; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Mohit Joshi; Nobuhiro Tsuji
Apr 2017 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2016.12.024 -
Cooperative strain accommodation over grains in martensitic transformation from Fe-Ni nanocrystalline austenite
Akinobu Shibata; Fumitaka Ichikawa; Hiroki Adachi; Tohru Yamasaki; Nobuhiro Tsuji
Feb 2017 in Philosophical Magazine Letters
DOI: 10.1080/09500839.2017.1292057
-
Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel
Yuji Momotani; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji
Feb 2017 in International Journal of Hydrogen Energy
DOI: 10.1016/J.IJHYDENE.2016.09.188
-
Microstructural and crystallographic features of hydrogen-related fracture in lath martensitic steels
Akinobu Shibata; Yuji Momotani; Tamotsu Murata; Takahiro Matsuoka; Mizuki Tsuboi; Nobuhiro Tsuji
Jan 2017 in Materials Science and Technology
DOI: 10.1080/02670836.2017.1312210
-
Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy
Wani, I. S.; Bhattacharjee, T.; Sheikh, S.; Clark, I. T.; Park, M. H.; Okawa, T.; Guo, S.; Bhattacharjee, P. P.; Tsuji, N.
2017 in Intermetallics
DOI: 10.1016/J.INTERMET.2016.12.018
-
Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT)
Chong, Yan; Bhattacharjee, Tilak; Yi, Jangho; Shibata, Akinobu; Tsuji, Nobuhiro
2017 in Scripta Materialia
DOI: 10.1016/J.SCRIPTAMAT.2017.05.038 -
Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy
Wani, I. S.; Wani, I. S.; Bhattacharjee, T.; Bhattacharjee, T.; Sheikh, S.; Sheikh, S.; Lu, Y.; Lu, Y.; Chatterjee, S.; Chatterjee, S.; Guo, S.; Guo, S.; Bhattacharjee, P. P.; Bhattacharjee, P. P.; Tsuji, N.; Tsuji, N.
2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/194/1/012018 -
Role of Different Kinds of Boundaries Against Cleavage Crack Propagation in Low-Temperature Embrittlement of Low-Carbon Martensitic Steel
Mizuki Tsuboi; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji
2017 in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
DOI: 10.1007/S11661-017-4107-9 -
Fracture surface topography analysis of the hydrogen-related fracture propagation process in martensitic steel
Shibata, Akinobu; Matsuoka, Takahiro; Ueno, Akira; Nobuhiro Tsuji
2017 in International Journal of Fracture
DOI: 10.1007/S10704-017-0182-6
-
Mechanism of Dynamic Formation of Ultrafine Ferrite Grains during High Temperature Processing in Steel
Zhao, Lijia; Park, Nokeun; Tian, Yanzhong; Shibata, Akinobu; Tsuji, Nobuhiro
2017 in Advanced Engineering Materials
DOI: 10.1002/ADEM.201600778
-
Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation
Zhao, Lijia; Park, Nokeun; Tian, Yanzhong; Chen, Shuai; Shibata, Akinobu; Tsuji, Nobuhiro
2017 in Materials Research Letters
DOI: 10.1080/21663831.2016.1208301
-
The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results
Park, Nokeun; Lee, Byeong-Joo; Tsuji, Nobuhiro
2017 in Journal of Alloys and Compounds
DOI: 10.1016/J.JALLCOM.2017.05.175
-
SEM/EBSD Analysis on Globularization Behavior of Lamellar Microstructure in Ti-6Al-4V During Hot Deformation and Annealing
Yoshinori Ito; Shogo Murakami; Nobuhiro Tsuji
2017 in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
DOI: 10.1007/S11661-017-4180-0 -
Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes
Kawarada, Ichiro; Zheng, Ruixiao; Shibata, Akinobu; Somekawa, Hidetoshi; Ogata, Shigenobu; Tsuji, Nobuhiro
2017 in PROCEEDINGS OF THE 3RD PAN AMERICAN MATERIALS CONGRESS
DOI: 10.1007/978-3-319-52392-7_41 -
On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography
Hamidreza Koohdar; Mahmoud Nili-Ahmadabadi; Mohammad Habibi-Parsa; Hamid Reza Jafarian; Tilak Bhattacharjee; Nobuhiro Tsuji
2017 in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
DOI: 10.1007/S11661-017-4288-2 -
Ultimate Rolling Texture in Pure Aluminum Highly Deformed by Accumulative Roll Bonding: Taylor Orientation Formed beyond Grain Subdivision
Yoji Miyajima; Daisuke Kashioka; Nobuhiro Tsuji
2017 in Materials Transactions
DOI: 10.2320/MATERTRANS.M2017131 -
Realizing Ultrafine Grained Steel by Simple Hot Deformation Using Dynamic Transformation and Subsequent Dynamic Recrystallization Mechanisms
Zhao, L.; Park, N.; Tian, Y.; Shibata, A.; Tsuji, N.
2017 in IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/194/1/012026 -
A novel ultrafine-grained Fe-22Mn-0.6C TWIP steel with superior strength and ductility
Y.Z. Tian; Y. Bai; Lijia Zhao; S. Gao; H.K. Yang; A. Shibata; Z.F. Zhang; N. Tsuji
2017 in Materials Characterization
DOI: 10.1016/J.MATCHAR.2016.12.026
Under Construction
Under Construction
Under Construction
-
日本金属学会第65回論文賞 組織部門、20017.9. 社団法人日本金属学会
Under Construction
Under Construction
Under Construction
Under Construction
Under Construction
Under Construction
Under Construction
Under Construction
Under Construction
Under Construction